Instant Hot Water System Installation
Many Melbourne residents are turning towards more cost-efficient and sustainable ways of replacing traditional hot water tanks. An instant hot water system installation is the ideal solution. When activated, these on-demand systems immediately heat water as it flows through them, compared to tanks storing large volumes of water that are constantly heated and reheated whether you’re using them or not.
The advantages are obvious. These instantaneous hot water systems only draw power when they’re in use. They don’t need a continuous supply, and they don’t consume as much as it takes to heat a standard water tank. The result? Less energy usage, lower monthly bills and an eco-friendlier set-up.
What is an Instantaneous Hot Water System?
An instantaneous hot water system works by only heating water when you turn on your tap. Cold water is directed through an internal heat exchanger that instantly heats it up before it reaches the outlet. It can be used to supply hot water to all your facilities and appliances, like your bath and shower, in your kitchen and for your laundry.
The method doesn’t need a big water storage tank, so not only does this reduce the amount of energy you use; it also means that the whole system is more compact and space-efficient. Instant hot water system installation is a game changing step for your home, apartment or business.
Benefits of Instant Hot Water System Installations
Installing an on-demand hot water system will pay off in several ways…
Higher energy efficiency, immediate lower costs
Instantaneous hot water systems only heat water when you need it. This completely removes the energy and cost of continuously keeping a large tank of water heated and ready for use. The results are significant reductions in energy use and water heating costs, particularly for family households that use more hot water.
Long-term savings
An instant hot water system installation will save you money in the long run too. The running and maintenance costs are lower than those of traditional hot water tanks. You also won’t be vulnerable to burst or leaking tanks that need to be to be replaced periodically.
Limitless hot water on tap
Hot water tanks can only hold a certain volume, creating the all-too-familiar family scenario of everyone rushing before the hot water runs out. The same holds true in commercial settings. This doesn’t happen with an instantaneous hot water system. As long as there is a water supply to the property, the system will heat it.
Flexible and ergonomic
On-demand hot water systems are compact and usually mounted out of the way on a wall. Thus they don’t take up much space, so they’re ideal for smaller homes like townhouses and apartments. There’s also no need to fit in a bulky hot water tank somewhere.
Cleaner water
Because only flowing water is heated with an on-demand system, it can be clearer than water which has been sitting in a tank for days where it can collect tiny particles of rust or sediment. An instant hot water system installation constantly delivers fresh water via its heat exchanger.
Types of Instant Hot Water System Installations We Offer
Only licensed electricians are allowed to install instantaneous hot water systems, often in tandem with a plumber. They need to execute very specific tasks:
- Assess electrical and gas supply capacity
- Check switchboard load and dedicated circuits
- Confirm water pressure and flow requirements
- Design an installation that meets Australian standards
- Complete all electrical safety compliance and certification
Instant electric hot water systems
These modern continuous flow units are very efficient at heating water and are the easiest to install. They don’t require the same safety measures and combustion venting as gas systems, and they’re the natural choice for properties without gas line access. This type of instant hot water system installation can be located indoors or outdoors.
Internal instant gas hot water systems
Internal instant gas hot water systems are the most popular choice for homes that have natural gas connections. It tends to heat the water quicker and can maintain flow rates to multiple outlets at the same time. This makes them especially suitable for commercial premises too.
Instant Hot Water System Installation Costs
Costs depend on several factors. Hence they can vary quite widely. They’re influenced by:
- Electric vs gas system
- Size and capacity of the unit
- Upgrades to switchboard or circuits
- Venting requirements for gas models
- Complexity of plumbing changes
How our Instant Hot Water System Installations Work
We offer top-quality, professional instant hot water system installations in Melbourne and surrounds. Our certified electricians follow a carefully planned process to ensure efficient and safe completion.
Step 1: Site Inspection and Initial Consultation
One of our experts inspects your property to analyse your water usage, electrical or gas capacity and your space constraints.
Step 2: Electrical or Gas Evaluation
We then thoroughly examine your switchboards, electrical circuits or gas lines to ensure that they can meet the requirements for an instant hot water system installation.
Step 3: Installation and Integration
This involves mounting the unit, usually on your wall, connecting it to your water supply lines and integrating it into your electrical system. If you’ve chosen a gas system, venting and safety features will also be fitted.
Step 4: Final Calibration, Testing and Certification
The final step involves checking that the water temperature and flow rates are consistent and that all the plumbing and electrical work is safe. A compliance certificate is then issued in line with Victorian and national regulations.
Frequently Asked Questions
Does an instant hot water system installation require maintenance?
Yes, like any other system an instant hot water unit needs regular servicing. Descaling ensures water purity and pressure checks maintain performance and prolong lifespan.
How do instant gas hot water systems work?
When you open a hot water tap, a sensor detects that water has begun to flow through the unit. This ignites the gas in a contained burner, which uses a heat exchanger to heat the water.
Can I buy an instant hot water unit and install it myself?
If you’re not a licensed electrician you shouldn’t attempt to install an instantaneous hot water system yourself. Not only will you put your safety at risk, you’ll also be contravening state and national regulations.
Can instant gas hot water systems be used with water tanks and a pump?
Instant gas hot water systems will work just as well with water tanks and a pump, as long as the pump creates a consistent flow of water. The system requires a constant water pressure to work optimally.
Contact us for expert instant hot water system installations in Melbourne and enjoy endless hot water, lower energy bills and complete peace of mind.
We carry out all work to the highest standards. All parts used by STL Electrical are of the highest quality. We’re experienced, fully licensed and insured electricians, working in Melbourne’s south eastern suburbs since 2000. We don’t cut corners. Our motto is to do all jobs properly, the first time.