Skip to content

Electrician Canterbury

Canterbury is about four kilometres east of our Hawthorn East workshop, usually a ten to fifteen minute run.

  • 5.0 from 216 Google reviews
  • Registered Electrical Contractor REC 20101
  • 25 years trading
Canterbury 3126

What goes wrong in Canterbury

Canterbury is one of the most tightly heritage-controlled parts of Melbourne’s inner east, and the housing is grander and older than its neighbours. Both of those facts change how electrical work is done here rather than whether it can be done.

Federation and Edwardian homes with original fabric

These houses have leadlight, deep cornices, pressed ceilings and joinery that cannot be replaced. A rewire is entirely achievable, but it is planned as an access problem first and a cable problem second. Routes go through roof and subfloor space, and where a wall must be entered it is chosen for where the damage can be made good invisibly. That planning is most of the skill in the job.

Heritage overlay and what can be seen

Surface conduit on a visible elevation, an air conditioner condenser in the wrong place, or a meter box relocated to a street frontage can all become planning problems in Canterbury. It is worth resolving at the quote stage. We would rather design the run around it than have you discover it later.

Mature trees and overhead service lines

The streets here are heavily treed, and many properties still have an overhead service from the street to the house. Branch contact with a service line causes intermittent faults that are maddening to chase from inside the house: lights flickering in wind, equipment resetting for no reason. If the symptom correlates with weather, look up before looking at the board.

Large blocks with outbuildings

Coach houses, studios and garden sheds on these blocks are often fed by old submains that have quietly acquired a load they were never sized for. The distances are long, so voltage drop shows up sooner than people expect.

Maling Road village

The retail strip is small, old and busy. The tenancies are compact, the meter arrangements are frequently historical, and the buildings are heritage. Fitout work here needs the supply question answered before the design is signed off, because the options for adding capacity are narrower than in a modern tenancy.

Getting to you

A straight run east along Canterbury Road from our workshop, ten to fifteen minutes outside peak. Same-day attendance is normal for morning calls. For genuine emergencies we aim to be on site within two hours, and the phone is answered 24 hours a day.

We also cover Camberwell, Hawthorn East, Glen Iris.

Services in Canterbury

What we are usually called out for here

House rewiring

Period homes with cloth or rubber-insulated wiring brought up to AS/NZS 3000, in stages if needed.

Switchboard upgrades

Ceramic fuses replaced with circuit breakers and safety switches, with capacity left for what you add next.

Questions

Canterbury questions we get asked

Will rewiring damage our Federation home's plasterwork?

It should not. The work is routed through roof and subfloor space rather than by chasing walls, and where a wall has to be opened we choose the point where it can be made good invisibly. We walk the route with you before starting.

Our lights flicker when it is windy. What causes that?

Very often tree contact with the overhead service line, which is common in Canterbury's treed streets. The symptom correlating with weather is the giveaway. It is not something to leave, because a service line being abraded by a branch eventually fails.

Does the heritage overlay affect electrical work?

It affects what is visible rather than what is possible. Surface conduit on a street elevation, a relocated meter box or an awkwardly placed condenser can all become planning issues. We design around it, and it is worth raising when you ask for a quote.

Who is responsible for the overhead line to our house?

The distributor owns the network up to the point of attachment on your property. From there in, it is yours. If a branch is touching the line on the network side, that is a call to your distributor, and we will tell you plainly which side of the boundary the problem sits on.

Can you work on the shops in Maling Road?

Yes. The tenancies there are compact and heritage, so the supply question needs answering before a fitout is designed rather than after. We check what the tenancy can carry against the equipment list at the quote stage.

Get it sorted

Book a Canterbury electrician

Fastest way to get an answer is the phone. It is answered 24 hours a day, seven days.

03 9889 3341

Not urgent? Send the details and we will come back to you within one business day.

Request a quote

Five fields. We only need enough to price the job.

What is happening, when it started, and the age of the property if you know it.

Call 03 9889 3341 Get a quote