Skip to content
03 9889 3341

Residential electricians for Melbourne's south-east

Houses in this part of Melbourne were wired across a century, and each era fails differently. Twenty-five years of working on them is how you tell which is which before pulling anything apart.

03 9889 3341 Request a quote
  • 5.0 from 216 Google reviews
  • Registered Electrical Contractor REC 20101
  • 25 years trading
Residential work

Your wiring has a birth year, and it tells us most of what we need

Almost every domestic job we attend comes down to one mismatch. The house was wired for the electrical load of its era, and the household now runs an induction cooktop, a heat pump, reverse cycle in three rooms and a car in the driveway. The wiring did not fail. It was asked to do something it was never sized for.

  • Period homes, Hawthorn through to Toorak. Usually rewired once, often in stages. The common finding is a modern kitchen circuit running off a board that still feeds rubber or cloth-insulated cable in the roof space.
  • Old rubber insulation fails when it is disturbed. Which is why the fault appears the week after someone fits downlights or lays ceiling insulation, not before.
  • Interwar and post-war, Glen Iris through to Ashburton. Usually the original ceramic fuse board, or an 1980s replacement with circuit breakers but no residual current device.
  • Those boards are full. A second bathroom, a studio out the back or a wall oven runs the board out of physical space long before the mains run out of capacity. This is the most common upgrade we do.
  • A circuit breaker protects the wiring. A safety switch protects the person. They are not the same device, and plenty of Melbourne homes still have only the first.
  • Anything wired before the early 1990s often has no RCD at all. Homes upgraded during the 1990s frequently have one covering power points only, with lighting and the oven left unprotected.
  • Altering a board brings its circuits under RCD protection, as AS/NZS 3000 requires. That is why an upgrade usually touches more circuits than the one that prompted the call.
  • Newer estates have the opposite problem. Dandenong, Berwick and the Peninsula are wired to current standards but built at volume: too few circuits, unsealed outdoor points and no spare ways.
  • Solar and EV charging both land on a board with nowhere to put them. On a newer home that is usually the first thing to check, not the last.
  • If you are renovating, ring before the walls close. The cheapest time to run a circuit is while the plaster is off. The most expensive is once the kitchen is finished.
  • We ask the age of the property and what has changed recently. A fault that appeared after a renovation is a different investigation to one that appeared on its own.
  • If something is sparking, smoking or hot to touch, ring now. The line is answered 24 hours a day, seven days.

What every job carries

25 years
trading
REC 20101
Registered Electrical Contractor, licensed in Victoria.
Public liability insured
Certificate of currency available on request.
AS/NZS 3000
Every job wired and tested to the Australian wiring rules.
Residential

What we get called out for

House rewiring

Period homes with cloth or rubber-insulated wiring brought up to AS/NZS 3000, in stages if needed.

Power point installation

New outlets, USB points and outdoor weatherproof power, added on a circuit that can carry them.

Switchboard upgrades

Ceramic fuses replaced with circuit breakers and safety switches, with capacity left for what you add next.

How it works

Four steps, no surprises

The part people dread is not the wiring. It is not knowing what it will cost or when someone will turn up.

  1. Call

    You describe the fault. We tell you whether it is urgent, and whether you should switch anything off before we arrive.

  2. Quote

    You get a price before any work starts. Estimates are free, and the price does not move unless the scope does.

  3. Book

    We agree a time. Most jobs across south-east Melbourne are attended the same day, emergencies ahead of planned work.

  4. Complete

    Work is tested and left clean, with a Certificate of Electrical Safety where the job requires one.

Licensing and credentials

  • 25 years trading
  • REC 20101 Registered Electrical Contractor, licensed in Victoria.
  • Public liability insured Certificate of currency available on request.
  • AS/NZS 3000 Every job wired and tested to the Australian wiring rules.
Questions

What people ask before they book

How do I know whether my house needs rewiring or just a repair?

A single dead circuit is usually a repair. Rewiring becomes the conversation when we find rubber or cloth-insulated cable, when faults keep appearing in different parts of the house, or when the insulation crumbles as soon as a cable is moved. We test before recommending either, and a partial rewire of the worst circuits is often the sensible middle path.

My safety switch keeps tripping. Is that the switch failing?

Rarely. A safety switch trips because it is detecting leakage to earth, which usually means moisture, a failing appliance or damaged cable. The fix is finding which circuit and which appliance, not replacing the device. Unplug everything on that circuit, reset, then reintroduce appliances one at a time. If it trips with nothing plugged in, ring us.

Do you work on weekends?

The phone is answered 24 hours a day, seven days, including public holidays. Emergency work happens whenever it needs to. Planned work is normally scheduled during the week, and a call-out fee applies outside standard hours, which we tell you before we dispatch anyone.

Can you give a price over the phone?

For simple replacements, often yes. For anything involving the switchboard, the mains or wiring of unknown age, no, and anyone who does is guessing. We look first, then quote a fixed price. The estimate is free.

Do I get paperwork when the job is finished?

Yes. Where the work requires one you get a Certificate of Electrical Safety. For prescribed work such as switchboard and mains alterations, an independent Licensed Electrical Inspector signs off as well. Keep those documents, because they matter when you sell or when you claim on insurance.

Which suburbs do you cover for residential work?

South-east Melbourne and the CBD, from Hawthorn East and Glen Iris through Camberwell, Malvern and Prahran, out to Dandenong and down to Mornington. The full list is on the service areas page.

Get it sorted

Talk to an electrician now

Fastest way to get an answer is the phone. It is answered 24 hours a day, seven days.

03 9889 3341

Not urgent? Send the details and we will come back to you within one business day.

Request a quote

Five fields. We only need enough to price the job.

What is happening, when it started, and the age of the property if you know it.

We use your details to answer this enquiry and quote the work. Read our privacy policy.

Call 03 9889 3341 Get a quote